Print Back
Equipped with a quick-opening, heated ball valve and mounted on pipe legs, these Waage series AWP agitated dispensing tanks are the standard WP models with the addition of 30 RPM motor-driven stirrer. Capacities range from 1 gallon to 100 gallons. Custom units to 750 gallons. Most Pots listed are also available in 60-450 degrees F. operating temperature ranges for lower temp. waxes and glue. Has manual reset hi-limit thermostat H2-550 for product safety. Accessory Equipment (upon request): Needle valves can be installed in these pots to dispense uniform quantities of material for production requirements; WP8A thru WP80A. Quick-opening, heated ball valves are available in 1/2", 3/4", 1", 1-1/2" (1/2" ball valve is the maximum for WP8A model). 12" legs standard, 16" optional. Models WP28A and larger available in 440V, 3 Phase. WP1AL thru WP8AL models for melting glue and low melting wax 60 -250 degrees F. Manual reset hi-limit thermostat on all models above 2 gallon.100 gallon, Equipped with a quick-opening, heated ball valve and mounted on pipe legs, these Waage series AWP agitated dispensing tanks are the standard WP models with the addition of 30 RPM motor-driven stirrer.
Unit of Measure

Specifications

Capacity

N/A 10 Gallons

Control Automatic

N/A 200-550 °F

Inside Depth

N/A 15 in.

Inside Diameter

N/A 14 in.

Outside Depth

N/A 21 in.

Outside Diameter

N/A 19 in.

Voltage/ Phase

N/A 440V/3PH

Wattage

N/A 6600 Watts